I was wanting to shift the cutoff frequency using various waveshapes. It doesn't really seem to work as I expected. For instance, keeping the cutoff at 250, I'll hear the lfo, but it will be at 250 hz. I would like to shift the frequency from the 250hz to 1khz (just an example) range using a square wave. I figured that I could do this with my mp201 or lightfoot labs goatkeeper, but it isn't really working.
Any suggestions?
Moving the mf101's cutoff frequency?
-
- Posts: 36
- Joined: Tue Jun 08, 2010 6:11 pm
Re: Moving the mf101's cutoff frequency?
Have you tried adjusting the LFO amount?
-
- Posts: 28
- Joined: Wed Aug 25, 2010 2:11 pm
Re: Moving the mf101's cutoff frequency?
The lfo amount is at full (4,000 something) on the mp-201. I don't think the goatkeeper will really work as a source, but the problem is that the mp-201 lacks many of the waveforms.noSpoonMusic wrote:Have you tried adjusting the LFO amount?
-
- Posts: 106
- Joined: Sat Jan 08, 2011 4:39 pm
- Location: Nottingham, UK
Re: Moving the mf101's cutoff frequency?
Something isn't set up right then… I use my MP-201 for just this thing…
Using a TS jack-jack?
Unipolar or Bipolar?
What are the knobs on the fooger' set to? (take a pic for us?)
What settings are you currently set to on the MP-201?
Shep
Using a TS jack-jack?
Unipolar or Bipolar?
What are the knobs on the fooger' set to? (take a pic for us?)
What settings are you currently set to on the MP-201?
Shep
Shep on Bass - My website & blog
Bitnormal Records - Netlabel specialising in electronica
KADE - Improvised live electronica
Patient Zero - International hip-hop & electronica collaboration
Bitnormal Records - Netlabel specialising in electronica
KADE - Improvised live electronica
Patient Zero - International hip-hop & electronica collaboration