Saving the "CALIBRATION" patch to a new location?

[Array]

Hey guys,

The "CALIBRATION" patch on the LP Stage is a great starting point for new patches, but is there a way to store changes made to this patch to a different location?

Thanks!

[robles]

Whenever you save a patch, press store, move the data knob to the patch number you want to store it to, then confirm your save. It will then be saved to that patch number.

[pmancona]

I cannot get the calibration path to store like a normal patch. Pressing store seems to do nothing.

[Amos]

this will probably be fixed in the new OS... you will not be able to save over the calibration patch, but should be able to store it to a different location.

For now, you can export the calibration preset as sysEx data. select the CA patch, go to the master->sysEx utilities menu, select "send cur preset"

then on the LP in preset mode select the patch location where you'd like to save a copy of the calibration preset, and send the sysex from your computer back to the LP. That should do it...

[Array]

this will probably be fixed in the new OS... you will not be able to save over the calibration patch, but should be able to store it to a different location.

For now, you can export the calibration preset as sysEx data. select the CA patch, go to the master->sysEx utilities menu, select "send cur preset"

then on the LP in preset mode select the patch location where you'd like to save a copy of the calibration preset, and send the sysex from your computer back to the LP. That should do it...

Cool, thanks for the suggestion.