Search found 30 matches
- Tue Mar 08, 2016 2:45 pm
- Forum: Minimoog Forum
- Topic: Pedal/On Mod Buss Issue?
- Replies: 4
- Views: 2843
Re: Pedal/On Mod Buss Issue?
Indeed it does fall in that range...just, annoyingly. Still waiting on a reply from moog.
- Sat Mar 05, 2016 8:30 pm
- Forum: Minimoog Forum
- Topic: Pedal/On Mod Buss Issue?
- Replies: 4
- Views: 2843
Re: Pedal/On Mod Buss Issue?
Didn't see that one, thanks. Yes, looks like I'll be sending it in, waiting for a reply from moog.
- Thu Mar 03, 2016 8:11 pm
- Forum: Minimoog Forum
- Topic: Pedal/On Mod Buss Issue?
- Replies: 4
- Views: 2843
Pedal/On Mod Buss Issue?
I haven't used my Voyager for a while, but fired it up recently to start work on a new project. But...I seem to have a problem. The 'amount' for the Pedal/On mod buss seems to have malfunctioned. It's either off, or full on - the pot has basically become a switch, immediately upon turning it it goes...
- Mon Jan 19, 2015 5:48 pm
- Forum: Minimoog Forum
- Topic: Analogue Sequencing Voyager
- Replies: 1
- Views: 1186
Analogue Sequencing Voyager
I just picked up an MFB Urzwerg Pro II sequencer, and am having trouble getting it to work as I would like with my Voyager. I send the CV to the Pitch input, and the Gate to the Envelope Gate input, and nothing - unless I hit a key, then I hear the sequence. Problem is, how do I get to to run withou...
- Thu Feb 06, 2014 10:23 am
- Forum: Moogerfooger Forum
- Topic: Rackmount kit
- Replies: 8
- Views: 3237
Re: Rackmount kit
From what I can see the cp is linked to the vx - there is no input on the cp, it seems to have been piggybacked from the vx. They didn't ship it with a serial cable, so I wont know until I get one if that's the case...here's hoping.
- Wed Feb 05, 2014 10:50 am
- Forum: Moogerfooger Forum
- Topic: Rackmount kit
- Replies: 8
- Views: 3237
Re: Rackmount kit
I have the 'fooger rack kit set up now.
Today I received a second hand vx-351/cp-251 in the rackmount. It came with no manuals or anything. My question is - where is the 9v input? I can't see anything on either unit, all holes are plugged. Does the power come from the Voyager via the cable?
Today I received a second hand vx-351/cp-251 in the rackmount. It came with no manuals or anything. My question is - where is the 9v input? I can't see anything on either unit, all holes are plugged. Does the power come from the Voyager via the cable?
- Mon Feb 03, 2014 9:13 pm
- Forum: Taurus, Minitaur & Sirin
- Topic: Taurus III dust cover
- Replies: 23
- Views: 7843
- Thu Jan 23, 2014 3:05 pm
- Forum: Moogerfooger Forum
- Topic: Rackmount kit
- Replies: 8
- Views: 3237
Re: Rackmount kit
Thanks for that. So in fact you do have to remove the sides from one of them, but there are no replacements as with the cp/vx kit? Good to know.
- Thu Jan 23, 2014 12:03 pm
- Forum: Moogerfooger Forum
- Topic: Rackmount kit
- Replies: 8
- Views: 3237
Re: Rackmount kit
I thought there were some wood pieces to connect the pedals together, which you use in place of the standard wood cheeks.
- Mon Jan 20, 2014 9:55 pm
- Forum: Moogerfooger Forum
- Topic: Rackmount kit
- Replies: 8
- Views: 3237
Rackmount kit
I've been planning to pick up a rackmount kit for some time, and have just found one second hand on-line. I am going to ask the seller if it is complete, but I need to know what should be included in the kit. Any info would be appreciated.
- Fri Dec 21, 2012 5:09 pm
- Forum: Minimoog Forum
- Topic: Any Final Select Series lurkers?
- Replies: 64
- Views: 17522
Re: Any Final Select Series lurkers?
Just ordered the last ever Cherry/Solar
- Thu Dec 06, 2012 5:51 pm
- Forum: Taurus, Minitaur & Sirin
- Topic: T3 Control wheel
- Replies: 2
- Views: 1159
Re: T3 Control wheel
Thanks for the reply. The wheel it correctly calibrated, and behaves as it should, it's simply that fifty percent isn't fifty percent, if that makes sense. Having looked at a whole bunch of youtube videos now I can see that it's common to every T3 where I can see the control wheel in use. It's not t...
- Tue Nov 20, 2012 6:27 pm
- Forum: Taurus, Minitaur & Sirin
- Topic: T3 Control wheel
- Replies: 2
- Views: 1159
T3 Control wheel
Something that has been bugging me since I bought my Taurus a while back is the range of the control wheel. When the wheel is physically at about half way, it reads about 3200, which is over three quarters of the available sweep, so in effect the most effective part of the control (particularly with...
- Wed Jan 04, 2012 5:18 pm
- Forum: Taurus, Minitaur & Sirin
- Topic: Free gift?
- Replies: 27
- Views: 9110
Re: Free gift?
I got a sticker when I registered my MP201, but for the life of me, I cannot work out any combination of my T3 serial number that works to get it registered on the site. I sent an email to customer service, no reply. Anyone work out how to get it to work? I know it's a problem often mentioned, but I...
- Fri Dec 09, 2011 6:12 am
- Forum: Taurus, Minitaur & Sirin
- Topic: New Taurus OS ideas
- Replies: 25
- Views: 8435
Re: New Taurus OS ideas
So I've had mine for three days and it's a superb synth. But, trying out a small midi keyboard last night - hanging notes. Needs fixing. One small thing that bugs me is the control wheel. When I have it at half way, the parameter reads over 3000, which is well over half. It seems the majority of the...