Minimoog Voyager XL

SOS

Moog Music is incredibly honored that The Minimoog Voyager XL was voted Best Keyboard/Synthesizer by the readers of Sound On Sound magazine.

Incorporating virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, The Minimoog Voyager XL features extensive front-panel patchability that harkens back to the original ground-breaking Moog modular synthesizers. A host of features previously found only on massive modular synthesizers combined with state-of-the-art analog technology make it a sound design and control dream machine. Highlights include:

61-Note Velocity Sensitive Keyboard with After-Pressure

Ribbon Controller with Pitch and Gate CV Outputs

Touch Surface Controller with X, Y, A and Gate Outputs

External Audio Input

Effects Loop Insert

2 Active Attenuators

4-Input CV Mixer

Lag Processor

Additional LFO Source with Multiple MIDI-Syncable Waveforms

3 Four-Way Mults

20 Control Voltage Outputs

3 Gate Outputs

10 Control Voltage Inputs

4 Gate Inputs

2 Modulation Busses

Solid Maple Cabinet

Tilting Control Panel

 

Minimoog Voyager XL

100% Analog Sound Engine

The MINIMOOG VOYAGER XL Synthesizer is a monophonic analog performance and production synthesizer. Based on the Minimoog Voyager sound engine, it incorporates virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, with the addition of a number of exciting features from Moog's modular synthesizer legacy.


Keyboard

61-Note Velocity Sensitive Keyboard with after-pressure. Identical to the Voyager 44-note keyboard.


Ribbon Controller

A 500mm Ribbon Controller is located on the middle wooden rail of the Voyager XL. It's center-point is lined up with 'middle-C' of the 61-note Keyboard. Outputs are sampled and available as CV-OUT (-5V to +5V) and GATE-OUT (0V to +5V).


(20) Control Voltage output

- Keyboard Pitch (w/ internal trim to calibrate to 1 V/Octave)
- Keyboard Velocity
- Keyboard Afterpressure
- Touch Surface X
- Touch Surface Y
- Touch Surface A (area)
- Pitch Bend Wheel
- Mod Wheel
- MOD 1 signal (signal at MOD 1 input)
- MOD 2 signal (signal at MOD 2 input)
- LFO triangle wave
- LFO square wave
- Mod Wheel Mod Buss output
- Pedal/On Mod Buss output
- Filter Envelope
- Volume envelope
- Sample and Hold Step
- Sample and Hold Smooth
- Noise
- Ribbon Controller CV Output (-5V to +5V)


(3) Gate outputs

- Keyboard Gate
- Touch Surface Gate
- Ribbon Controller Gate Output


(3) 4-way Mults (top jack is ring-powered)


(10) Control Voltage Inputs

- Envelope Rate CV (-5V to +5V) Ring-Powered
- OSC Pitch CV (adj. to 1V/Octave) (-5V to +5V) Ring-Powered
- OSC Wave CV (all three osc. affected) ( 0V to +5V) Ring-Powered
- FILTER Cutoff CV (-5V to +5V) Ring-Powered
- VCA Volume CV ( 0V to +5V) Ring-Powered
- VCA Pan CV (-2.5V to +2.5V) Ring-Powered
- LFO Rate CV (-5V to +5V) Ring-Powered
- MOD Mod1 CV ( 0V to +5V) Ring-Powered
- MOD Mod2 CV ( 0V to +5V) Ring-Powered
- S&H CV (-5V to +5V) Ring-Powered


(4) Gate Inputs

- ENV Release ON/OFF (0V OFF, +5V ON)
- ENV Gate Input (0V OFF, +5V ON)
- LFO Sync ON/OFF (0V OFF, +5V ON)
- S&H Gate Input (0V OFF, +5V ON) No footswitch input


(2) Active Attenuators

Active Attenuators are identical to the VX-352 attenuators with the following difference:

CHANNEL 1 is normalled to LFO 2 output. So, if nothing is connected to the Channel 1 input jack, the output of Channel 1 will be the attenuated version of the LFO 2 output.

CHANNEL 2 is normalled to RIBBON output. So, if nothing is connected to the Channel 2 input jack, the output of Channel 2 will be the attenuated version of the RIBBON controller.

EXPRESSION PEDALS can be connected to the Attenuator inputs (i.e. they are ring-powered inputs).

AMOUNT controls gain of -1 (CCW) to 1 (CW). Thus, the attenuators can create an inverted version of the waveform.

OFFSET control allows you to add a DC voltage of -5V to +5V to the input signal. The Attenuator output will be clipped to approximately +/-10V.


Four-Input Mixer

- Inputs 1 and 2 can be attenuated via front-panel knobs
- Inputs 1 and 3 can be controlled by Expression Pedals (i.e. ring-powered)
- Two output CV's (+) and (-)
- DC offset can be added to signal via OFFSET knob
- Overall output of MIXER can be adjusted via the MASTER knob


Lag Processor

RISE and FALL time constants are adjustable from 1 millisecond to 1 second (middle is 100 millisecond).


LFO 2

A MIDI-syncable second LFO source has been added to the Voyager XL. The default frequency range is 0.02Hz (50 seconds) to 20Hz (0.05 seconds). This range was made to augment the current Voyager LFO which does not go slow-enough for some very slow modulations.

INPUTS: LFO 2 can be

- Free-running (adjusted by the RATE knob on the front panel)
- MIDI SYNC from external MIDI clock
- Directly CLOCKED from a GATE CV via the front panel CLOCK jack
- Controlled via external CV or Expression Pedal via the front panel RATE CV jack

OUTPUTS: LFO 2 has two complementary LFO outputs labeled (+) and (-). In default mode, these are the same waveform 180 degrees out of phase.

WAVEFORMS

Available front-panel waveforms:

- TRIANGLE
- SQUARE
- RAMP
- SAW
- S&H
- S&H SMOOTH


Power

Power input accepts a standard power cable. The Minimoog Voyager XL works from 100-250 VAC, 50-60 Hz.

12V Lamp
The TNC Lamp Socket provides 12VDC for a gooseneck lamp.

Minimoog Voyager

Category Name Added Format Description Download Link
Manual Minimoog Voyager XL User's Manual 2011-04-22 PDF

The Minimoog Voyager XL User's Manual is your key to a deeper understanding of this ground-breaking instrument. Read it and unlock the secrets of everything from the Ribbon Controller to LFO2.

voyager_xl_manual.pdf
Manual Minimoog Voyager XL LFO2 Addendum 2011-04-22 PDF

An in-depth look at the capabilities of LFO2 and its MIDI implementation.

xl_man_add__lfo2_midi.pdf
Introducing the Minimoog Voyager XL
See video
Richard Vogel of Galactic meets the Minimoog Voyager XL
See video
Modular Percussion
See video
Marc Doty on the Minimoog Voyager XL
Marc Doty meets the Minimoog Voyager XL
Modulatus Maximus
See video
The Moog Ladder Filter
See video
The Blueprint | Moog
See video
Voyager XL Review from Synthtopia

Designed in celebration of the 40th anniversary of the Minimoog, the Minimoog Voyager XL is a sonic powerhouse that pays homage to important milestones in the Moog synthesizer legacy. It starts with the heart of a Minimoog Model D. Fat oscillators and warm Moog filters give it that unmistakable Moog sound and the rugged construction and intuitive user interface design immediately tells you that you’re playing a high-quality musical instrument.

Click here to read the full review.

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading