Each CV output can be programmed individually. Signals can be foot pedal controlled analogue control voltages with +/-5V limits, LFO waveforms, Envelope or Gate voltages, or MIDI-controlled Pitch-CV. In addition, each channel can output MIDI CC's over specified MIDI channels simultaneously with the analogue CV outputs.

Output Signals

*The footpedal voltage with user selected heel and toe voltages (including reverse action)
*Preset Voltage levels
*Analog Envelopes (ADSR with Hold and Looping), Lin / Log / Exp. EG shapes
*MIDI to Pitch CV, scalable from 0.667 V/Octave to 1.333 V/Octave
*LFO of user programmed RATE, AMOUNT and WAVEFORM (triangle, square, sawtooth, ramp and sample & hold)
*LFO signals are scalable and can be synced to MIDI clock, tap tempo, each other, or free-running.
*A random NOISE CV

Modes of Operation

There are four modes of operation:

Single Channel Mode uses the footswitches to select programs, channels, turn on/off channels, select tap tempo function, enter tap tempo.

Quad Channel Mode turns channels 1-4 on/off with footswitches 1-4 and uses the footpedal as an expression pedal for channels 1 to 4. Can use channels one-at-a-time (instant switching between channels) or simultaneously. Independent tap-tempo available on all four channels.

Edit Mode programs the preset mode.

Utilities Mode accesses the utilities menu for non-preset related functions (SysEx Dump, Upgrade firmware, Factory Restore, Footpedal Calibration, etc...)

Multi Pedal Control Elements

*Optical "Gas Pedal" style foot controller
*4 footswitches (momentary)
*4 LEDs, 1 for each footswitch.16x2 character LCD (Gray Background, transflective, white LED backlight)
*Rotary Encoder with push switch (VALUE, CURSOR)
*2 Momentary switches near LCD / Encoder (EDIT, STORE)

Rear Panel Connections

*USB Port (MIDI over USB)
*MIDI In (DIN connector)
*MIDI Out (DIN connectors)
*4 x CV (Control Voltage) Out 1/4" connectors (selectable between -5V to 5V or 0V to 5V) Power In (wall mount power supply included)