The Look Book

 

The new look for every season...

Rosser D., Moog Service Technician, tests the feel of the potentiometers on a Minimoog Voyager Performer Edition. Every Voyager passes through 6 stations of quality assurance during its build process ending with a final check and polishing in the shipping department.

On October 28th, 1969 Bob Moog was granted patent #3,475,623 for the famous Moog Ladder filter—the cornerstone of the Moog sound and subtractive synthesis. It is so named because the tunable 24dB per octave low pass filter was developed using a balanced differential "ladder" topology consisting of 4 precision matched pairs of NPN BJT transistors matched with 4 high quality capacitors in a novel Q-C (transistor Capacitor) filter stage. 

Matt D., Moog Production Team, is using the oscilloscope to verify that the wave form he sees on the screen matches the sound he hears, as he dials in the oscillator and filters of the Taurus 3 to meet Moog’s stringent sonic performance criteria.

Let your Moog shine with these high quality foil logo tees.

Eric C., Moog Guitar Product Manager and Engineer, consults a schematic while adding MIDI control to a Butterscotch E-1 Moog Guitar. This new upgrade gives it the capacity to control MIDI devices while retaining its unique ability to control string vibration, providing infinite sustain, muting and more.

A free-running voltage-controlled oscillator is the heartbeat of a Moog synthesizer. This is where it all starts.

Rosser D., Moog service technician, finalizes calibration on a customer’s Little Phatty. Each product is individually hand-calibrated, tested and tuned to ensure that every instrument matches our strict sonic requirements.

The graphic on this tee depicts the Printed Circuit Board for the Taurus 3 Bass Pedals. The Taurus PCB is a 6 Layer piece of 0.062" RoHS, TG-170 FR4, with an LPI TIO Mask and an ENIG over SMOBC finish. Built to IPC-A-600 Class-B Standards using an impedance controlled stack-up of 2116 and 7628 fiberglass with a 1oz copper plane in a SPSSPS stack.

2 Comments

Comments

The task for Rosser will be too hard as he has to go through each and every report and music that he gets to select the best one. I liked reading on the page that you have posted here. Good post and nice read. It is a clear fact that such good musics come up after all these trials and checking. Kiddie Cook Books
Print on demand is a printing technology and business process in which new copies of a book (or other document) are not printed until an order has been received, which means books can be printed one at a time. While build to order has been an established business model in many other industries, "print on demand" developed only after digital printing began, because it was not economical to print single copies using traditional printing technology such as letterpress and offset printing. Many traditional small presses have replaced their traditional printing equipment with POD equipment or contract their printing out to POD service providers. Many academic publishers, including university presses, use POD services to maintain a large backlist; some even use POD for all of their publications. Larger publishers may use POD in special circumstances, such as reprinting older titles that are out of print or for performing test marketing. Jack Printing Companies | Custom Sticker Printing | Sticker Printing companies | Printing Service | Low Cost Printing | Print Trade | Print Wholesale | Print Outsource | Printing | Print Stickers Toronto Printing | Calgary Printing | Winnipeg Printing | Montreal Printing | Regina Printing | Saskatoon Printing | Quebec Printing | Ottawa Printing | Edmonton Printing | Vancouver Printing
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading